Vastaa Viestiin

Geneweb7 CGI / Debian 10

Pour poser toutes vos questions sur l'utilisation du logiciel GeneWeb (Version Windows, Linux, Mac). Attention, toutes les questions posées sur ce forum doivent uniquement concerner l'utilisation de GeneWeb sur votre ordinateur personnel.
stingfi
male
Viestit: 5

Geneweb7 CGI / Debian 10

Viesti Kirjoittaja stingfi »

Bonjour.
Je ne parle pas français, mais Google le fait (traduit de l'anglais) :)
Deux problèmes:
1. Installation de GeneWeb7 sur le RaspberryPi4 modèle B. en suivant ces instructions. <https://geneweb.tuxfamily.org/wiki/Installing_GeneWeb_7_on_a_Raspberry_Pi_webserver>
Cela fonctionne mais il y a un problème: par ex. <gwd.sh?m=IM&v=/married.png> fonctionne, mais pas celui-ci: <gwd.sh?m=IM&v=/modules/menubar_1.jpg>. Les fichiers existent et la propriété et les droits sont les mêmes pour les deux fichiers et les deux répertoires.
Mon serveur Web en ce moment <stingfi.ddns.net:8080/cgi-bin/gwd.sh?b=family3> (essayez-le, et recherchez le nom de famille Ingman)

2. J'ai téléchargé GeneWeb7 pour Linux <https://github.com/geneweb/geneweb/releases/download/v7.0.0/geneweb-linux-88536ed4.zip> et mis en mode CGI sur mon Linux Debian Buster derrière Apache2 , mais gwd ne démarre pas. "bash: ./gw/gwd: impossible d'exécuter le fichier binaire: erreur de format d'exécution"
Le code d'erreur dit: "le binaire en cours d'exécution est fait pour une architecture différente de l'environnement actuellement démarré".
Existe-t-il une version Geneweb7 spécialement pour Debian 10?


Two problems:
No 1. Installed GeneWeb7 on RaspberryPi4 model B. following these instruktions. https://geneweb.tuxfamily.org/wiki/Installing_GeneWeb_7_on_a_Raspberry_Pi_webserver
It works but there is a problem: Eg. "gwd.sh?m=IM&v=/married.png" works, but not this: "gwd.sh?m=IM&v=/modules/menubar_1.jpg". The files exists and ownership and rights are the same for both files and both directories.
My webserver at the moment <stingfi.ddns.net:8080/cgi-bin/gwd.sh?b=family3> (try it)

No2: Did download GeneWeb7 for Linux <https://github.com/geneweb/geneweb/releases/download/v7.0.0/geneweb-linux-88536ed4.zip>, and put in CGI-mode on my Linux Debian Buster behind Apache2, but gwd will not start. "bash: ./gw/gwd: cannot execute binary file: Exec format error"
Error code says: "the binary being executed is made for a different architecture than the environment currently booted".
Is there a Geneweb7 version for especially Debian 10?
stingfi
male
Viestit: 5

Re: Geneweb7 CGI / Debian 10

Viesti Kirjoittaja stingfi »

Mettre à jour
Le numéro 2 est obsolète. J'ai appliqué les instructions pour Raspberry pi 4 <https://geneweb.tuxfamily.org/wiki/Installing_GeneWeb_7_on_a_Raspberry_Pi_webserver> sur mon PC Linux Debian 10. J'ai dû faire quelques changements: jingoo.1.4.1 -> jingoo.1.4.2 et dune.1.11.4 -> dune.2.7.1 et ~ $ opam install syslog.

Ce système fonctionne exactement comme le Raspberry Pi. cela signifie que j'ai le même problème, numéro 1.

Issue no 2 is obsolete. I did apply the instructions for Raspberry pi 4 <https://geneweb.tuxfamily.org/wiki/Installing_GeneWeb_7_on_a_Raspberry_Pi_webserver> on my PC Linux Debian 10. I had to make some changes: jingoo.1.4.1 -> jingoo.1.4.2 and dune.1.11.4 -> dune.2.7.1 and ~$opam install syslog.

This system works exactly as the Raspberry Pi. that means the I have the same problem = Issue 1.
stingfi
male
Viestit: 5

Re: Geneweb7 CGI / Debian 10

Viesti Kirjoittaja stingfi »

This issue has been posted (transferred) here https://github.com/geneweb/geneweb/issues/1109#issuecomment-753288569
Vastaa Viestiin

Palaa sivulle “GeneWeb”